What does f1 mean on my Whirlpool dryer?

The whirlpool Cabrio dryer F01 error means the main control has an internal failure. The F1 error on the cabrio dryer is the same as the F01 Error.

The “F1” error means that the dryer’s thermistor failed. The dryer is reading the thermistor as “open” and the actual part has shorted out. The thermistor is used to read and control temperatures within the dryer. Without the part, the dryer will not operate.

Also Know, how do I reset my Whirlpool Duet dryer? How to Troubleshoot a Whirlpool Duet Electric Dryer

  1. Inspect household fuses or breakers.
  2. Close the dryer door firmly.
  3. Press and hold the “Start” button for five seconds.
  4. Check the display on the dryer for error codes.
  5. Press the “Start” button and hold for several seconds to restart the dryer if “PF” appears on the display.

Hereof, how do I fix f01 on my Whirlpool dryer?

The Whirlpool Duet Dryer F01 error may be able to be fixed with a simple reset of the main control. Unplug the dryer for 1 minute and plug it back in this will reset the control if the error persists after that you will need to check the dryer thermal fuse. The fuse is located on top of the blower wheel housing.

What does f01 mean?

electronic machine control board

How much is a Whirlpool Duet dryer?

Prices White Lunar Silver Source $1,249 $1,349 MSRP $900 Best Buy (Shipping/delivery typically $0-$70+) $1,080 Sears (Delivery starts at $80; at times offers free shipping/delivery) $899 $1,169 Home Depot (Delivery starts at $80; at times offers free shipping/delivery)

How do I reset my Whirlpool Cabrio dryer?

How to Reset a Whirlpool Cabrio Touch any key on the display pad to clear the error code, if applicable, or press “Pause/Cancel.” Choose a new cycle and press “Start” to begin. Turn off and disconnect the Cabrio if the error or problem persists. Wait several minutes before restoring power. Contact Whirlpool for assistance if the unit will not reset.

What is f1 error on Whirlpool Cabrio?

When the Whirlpool Cabrio displays an F1 error, this means the the control board is having difficulty communicating with the motor. To fix your F1 error, you can first try to unplug your washing machine for 15 minutes and then plug it back in. If this doesn’t work, you will need to replace the control board.

How do you start a Whirlpool Duet dryer?

On the control panel of the Whirlpool Duet dryer, and similar dryers, you push both a “Power” button and an actual “Start” button to use the dryer. A cycle knob allows you to select your preferred drying cycle, but the “Start” button must be pressed to start the load of laundry.

How do you reset a Kenmore he2 dryer?

To reboot or reset the control board on this type of dryer, you can try unplugging it (or shutting off the house breaker) to completely disconnect electrical power for 3 minutes. After restoring electrical power, the control board will sometimes reset to its original factory settings and work properly.

How long should a dryer last?

eight to 12 years

What does f01 mean on a Maytag dryer?

Maytag Bravos Dryer Error Code = F01 Error Condition = Main Electronic Control Board Fail. Check or Repair Needed = Remove the dryer from power for 10 minutes. Apply power back to the dryer and if the code returns you need to replace the main electronic control board. Replacement Parts = Main Electronic Control Board.

Does my Whirlpool dryer have a reset button?

Resetting the dryer is not necessary. If the dryer does not have heat, replace or reset the fuse or circuit breaker. Disconnect power to the dryer then restore power to perform a full reset.

Where is the dryer reset button?

Many dryers are equipped with a reset button on the control panel. If the motor won’t run, let the dryer cool for about ten minutes. Then push the reset button. If there are no problems with the motor, switches, or electrical system, this should restart the dryer.