How much does it cost to resurface brake drums?

The average cost for a brake shoe replacement, resurface drums is between $248 and $350. Labor costs are estimated between $211 and $267 while parts are priced between $37 and $83. Estimate does not include taxes and fees.

Any drum worn beyond 0.060″, or that would be over 0.060″ larger after resurfacing, should never be turned on a lathe, it should be replaced. Wear is checked by measuring diameter with a drum micrometer. If the gauge shows enough metal left to safely turn it, the drum can be resurfaced to restore and true the surface.

Likewise, can you machine drum brakes? It might not be possible to machine your rotors or drums, however. Sometimes there’s not enough metal remaining in the part to perform a machining. To make this determination, the person doing the machining needs to measure the thickness of the metal remaining on your drum or brake disc.

Similarly, it is asked, how long do drum brakes last?

The brake drums on your car are built to last for about 200,000 miles. In some cases, the drums will wear out sooner due to worn out internal components that put more strain on the drum.

Do drum brakes go bad?

One of the first symptoms of bad or failing drum brakes is unusual brake pedal feel. If the brake drums are worn excessively they can cause vibrations that may be felt in the pedal. Worn drums may also cause shuddering or pulsating that will become noticeable once you step on the pedal.

Can you turn trailer brake drums?

view full answer Hubs and drums that can be turned (machined) will have a specification on how much they can be turned cast into the metal of the drum somewhere. Otherwise it is at the brake shop’s discretion. Drums do not have to be turned unless there is someā€¦

Does O’Reilly resurface rotors?

Drum & Rotor Resurfacing Most O’Reilly Auto Parts locations can resurface your vehicle’s drums and rotors if they measure within specs and aren’t showing signs of extreme wear. Surface finish is crucial to proper vehicle braking and pad life and should always be part of a complete brake job.

Are drum brakes more expensive to replace?

Drum brakes are imperative to slowing down and stopping vehicles in older automobiles. Replacing the iron brake drums is expensive as there is a significant amount of labor involved, and the parts themselves will cost on average $100. The full brake drum replacement cost averages between $250 and $350.

How often should drum brakes be serviced?

There are cars, where the periodic brake service is mentioned in the maintenance schedule, however in most cars, the maintenance schedule only mentions regular brake inspections. How long do brakes last? On average, disc brakes last for 30,000-50,000 miles. Rear drum brakes may last for up to 150,000 miles.

How often should you change drum brakes?

That fully depends upon if you have 4 wheel drum or disc drum combo. If 4 wheel drum I recommend you have them serviced (clean & function check) every 30 to 40 thousand miles and replaced when they need. This interval is also a good time to flush the brake system fluid.

How long do brakes last after they start grinding?

Your Rotor Discs Need to Be Replaced You may be driving your car on an everyday basis, but the grinding sounds still persist. This could be because your rotor discs have gotten worn out from multiple years of use. An average braking system has a lifespan of around 20,000 miles.

How many miles do rotors last?

The rotors on a vehicle can last anywhere from 30,000 to 70,000 miles and sometimes more. A licensed mechanic, such as one from YourMechanic, can evaluate the rotors and advise you on their status; they may not need to be changed as often as the brake pads. Like brake pads, they should be replaced in pairs.

How do you know when drum brake shoes need replacing?

Technical Bulletins Inconsistent brake pedal feel. If the rear brakes are drum brakes, the driver may feel vibrations under braking. Hand brake feels loose. If the hand brake requires a hard yank to keep the car from rolling off, chances are the brake shoes need replacing. Scraping noise while braking.

How many miles should brakes last?

As a general rule of thumb, there’s about a 40,000 mile range in play. Average brake pad life is somewhere around 25,000 to 65,000 miles. However, many people have heard of brake pads lasting more than 70,000 miles, even beyond the 80,000 mile threshold. You may have even experienced super-long brake pad wear yourself.

What causes drum brake squealing?

The most common reason disc brakes squeal is because the brake pads are worn out. Disc brake pads have a piece of metal built into them, which is called a wear indicator. When it comes to drum brakes the most common cause of squealing is poor contact between the shoes and the drum or brake shoes that have worn out.