Turn the lock until the numbers read right-side-up. Roll the left-most dial until the first number of your combination lines up with the scored hash mark just to the left of the dial. Roll the middle dial until the appropriate number lines up with the number to its left. Do the same for the right-most number.
Category: “Set-Your-Own” Combination Locks Instructions
- Open lock with the factory set or previously set combination.
- Insert reset tool (enclosed in package) in hole on side of lock.
- Push reset tool in and turn 90 degrees (in either direction).
- Set wheels to desired combination.
- Turn and remove reset tool.
Beside above, how do you crack a 3 digit combination lock? Turn the lock until the numbers read right-side-up. Roll the left-most dial until the first number of your combination lines up with the scored hash mark just to the left of the dial. Roll the middle dial until the appropriate number lines up with the number to its left. Do the same for the right-most number.
In this way, can a combination lock be reset?
Resettable combination locks have a combination that is assigned by the owner of the lock. Therefore, Master Lock does not have record of the combination that the owner set. The lock cannot be reset unless it is in the open position. If your lock is attached to something, you will need to call a locksmith for removal.
How do you open a combination lock without the code?
To open combination locks without a code, start by pulling up on the dial and turning it clockwise until you hear the lock click. Then, check what number you’re at, add 5 to that number, and write it down. Next, set the dial to that number and turn it counterclockwise until you hear it click again.
How do you open a 4 digit combination lock if you forgot the code?
If you forgot a bike lock combination or the digits to a padlock with a dial, you can try to reset it. Pull on the shackle until you see the wheels turn. When the wheel sticks or catches, move to the next wheel and continue through all the wheels.
How do you pick a Master combination lock?
Standard Instructions for Opening a Combination Lock Turn right three times. Stop at First Digit. Turn left one full turn passing 1st number and stop at Second Digit. Turn right and stop at Third Digit. Pull shackle. Profit.
How do you reset a number lock?
Take these steps to reset your lock: Pull up the shackle to open the lock. Rotate the shackle 90° counterclockwise and press all the way down. Hold down the shackle and set your own combination by turning dials. Turn the shackle back as normal. The setting is now complete.
How do you change the combination on a combination lock?
How to Set a Combination Lock Pull up the shackle to unlock. Rotate the shackle 90 degrees counterclockwise and press down. Hold down and continue to turn the counterclockwise another 90 degrees. Set your own combination by turning the dials. Turn the shackle back as normal then the setting is complete.
How do you change the combination on a door lock?
Use a Phillips screwdriver to unscrew the four red screws securing the front plate of your keyless door lock to the base. Hold down the “C” button from the front of the faceplate the entire time you are changing the code on your keyless door lock.