How do you change the blade on a skilsaw 5480?

To change a blade on a skilsaw, lock the blade, remove the retaining bolt with a wrench, remove the old blade, replace with the new blade and lock it into place. Release the safety guard after the new blade is locked with advice from a foreman in this free video on changing a skilsaw blade.

  1. Turn the Skilsaw off.
  2. Press the red button to lock the blade.
  3. Lift the safety guard.
  4. Use a 3/4″ wrench to remove the retaining bolt from the center of the blade on your Skilsaw.
  5. Place the new blade on the Skilsaw.
  6. Replace the retaining bolt to lock the new blade into position.

One may also ask, what is a blade wrench? Blade Wrench. The metal blade wrench is used to tighten and loosen the blade bolt when changing the saw’s blade.

In this manner, how do you change a blade on a jigsaw?

To change a blade, switch off the jigsaw, unplug it, and let the used blade cool down. Pull up the saw-blade locking lever and let the used blade fall out with a slight shake. Turn the jigsaw upside down. Hold the fresh blade with its teeth forward; insert the blade shank into the blade holder as deeply as it will go.

How do you use a skilsaw 5150?

Instructions for a Skilsaw 5150

  1. Disconnect the power plug from the outlet.
  2. Place the base of the Skilsaw next to the edge of the material you want to cut through.
  3. Slide the depth adjuster lock upward.
  4. Loosen the bevel adjustment wing nut located on the back of the saw and adjust it to 0-degrees.

How do you tighten a circular saw blade?

In general, the blades on right-handed circular saws turn counterclockwise, so you’d tighten the bolt clockwise; the blades on left-handed circular saws turn clockwise, so you’d tighten the bolt counterclockwise. Hold the outer flange (rim) of the nut with a wrench to keep it from turning.

How do I change the blade on a Makita circular saw?

Be sure the blade is installed with teeth pointing up at the front of the tool. Use only the Makita wrench to install or remove the blade. To remove the blade, press the shaft lock so that the blade cannot revolve and use the wrench to loosen the hex bolt clockwise. Then remove the hex bolt, outer flange and blade.

What direction does a circular saw spin?

Circular saws rotate by default in a counter-clockwise direction. The teeth of a circular blade are designed to cut on the upstroke in the forward direction. This pushes the material forward and towards the blade so that it helps maintain control of the saw and the workpiece.

Are circular saw blades Universal?

Circular saw blades are designed for use with miter saws, table saws, radial arm saws, cut-off saws and standard circular saws. Many circular blades can be used interchangeably between devices. This guide will help you use the correct blade for each job.

How do you change a Porter Cable circular saw blade?

How to Replace the Blade Guard on a Porter Cable Circular Saw Remove the saw blade. Remove the nut that secures the blade to the saw. Now you can remove the saw blade. Remove the guard. Use a flat-head screwdriver to pry up the guard retaining ring. Replace the guard. Use your screwdriver to pop the hooked end of the spring into the hole on the guard cover. Reinstall the blade.

Where is the arbor lock on a circular saw?

Place the saw on a wooden surface and pull back the blade guard. If the saw has an arbor lock button on the top of the housing, press it in. The arbor is the shaft the blade installs on. If there’s no lock button, press the blade into the wooden surface.

How do I change the blade on a reciprocating saw?

How to Insert a Sawzall Blade Unplug your Sawzall and set it on a work surface where you have some decent lighting. Insert the hex key into the blade clamp screw located on the left or right side of the spindle. Turn the key counter-clockwise to loosen the screw. Remove the existing blade and set it aside.